Emergencies - finmon mi64 User Manual

Note

9 Emergencies

Your keypad has three emergency keys which have icons on:
 Panic- Shield
 Fire- Flames
 Medical- Cross
When one of these keys are touched a specific reporting code is sent to your
monitoring company.
9.1 Panic Alarm
When
How
Step-by-step
Note
9.2 Fire Alarm
will now be flashing.
 To exit view mode touch [#].
The partition memory will be erased the next time the
system is armed.
There is an emergency and you require help from your
monitoring company's response team.
 Hold down the [PANIC] key.
 Hold down the [PANIC] key on the keypad. A panic
alarm will be activated and reported to your
monitoring company.
 Any fixed panic buttons or remote panic buttons can
also be touched to activate the panic alarm.
 Depending on the how the installer has programmed
your system, the panic could cause a siren to sound
or it will silent and just an activation will be sent.
 When activated from the keypad you will hear a
long beep.
 If the siren is sounding, you can silence it by
entering a valid [USER CODE].
Touch this key only when an EMERGENCY
RESPONSE is required.
Make sure your whole family/staff know where any fixed
panic buttons have been installed. If you are unsure, please
ask your installer.