Editing the effects
Equalizer
Use the three knobs of the EQUALIZER section to access the threeband
equalizer and adjust the overall tonal characteristics of the sound coming
from the SV2. To reset an EQ band to the original value, press the corre
sponding knob.
1
Use the three EQUALIZER knobs to adjust the low, mid and high frequencies.
2
After having changed a knob position, you can return to the original settings
by pressing the corresponding knob.
WARNING:
Extreme EQ settings may produce a very loud signal.
Pre FX
The SV2 includes a stompbox simulator, that recreates the sound of a pedal
effect inserted before the amplifier's input. Use the PRE FX section to select
one of the six pedal effect models the SV2 offers. Pedal effects are connect
ed before the amp.
1
Use the TYPE knob of the PRE FX section to select a different stompbox
effect (compressor, booster, UVibe, vibrato, tremolo or wah).
2
You can change the speed of the modulation of the UVibe or tremolo ef
fects by using the SPEED knob, and the intensity of the modulation by using
Using the effects |27