Korg SV-2 User Manual page 104

96| The Editor
Plate
This models a type of reverb unit that works by vibrating a metal plate. It is
adjusted to a fairly short reverb time. This reverberation is characterized by
a rapid attack, and is suitable for percussive playing.
Parameters
Time
Lo Gain
Hi Gain
Pre Delay
Mix
Hall
This models the reverberation of a concert hall with numerous reflections.
Values Notes
1...30 Sets the reverb time.
­15.0...15.0 Adjusts the low­frequency range.
­15.0...15.0 Adjusts the high­frequency range.
0...200 Sets the initial delay before the reverberation begins. By
adjusting this setting you can clarify the definition of the
original sound.
0...100 Adjusts the mix between the direct signal and the effect.