Installing Air Guides For Pccb Brake Discs − Gt2; Installing Front Air Guides; Installing Rear Air Guides - Porsche 996 TT Repair Manual

01 Installing air guides for PCCB brake discs − GT2
Note

Installing front air guides

Installing rear air guides

Note
The air guides (brake−air spoiler) on the front suspension of GT2 vehicles with PCCB brakes are
•
larger than those of a conventional brake system! Exclusively for PCCB brakes, air guides (brake−air
spoiler) are also mounted on the rear suspension!
• These air guides are not mounted during transport!
CAUTION
Damaged, worn or missing aerodynamic components such as spoilers or underside panels affect the driving
behaviour and therefore must be replaced immediately!
Spoilers and undersides must therefore be regularly checked for damage!
•
• Please inform the customers concerned about this!
top of page
Installing front air guides
1. Mount the air guide (brake−air spoiler) on the front control arm (clip in similar to the standard air spoiler
on the Carrera 996 and Turbo 996). Then insert the expansion rivet (included in the scope of delivery) into
the bore present −arrow− . In vehicles with the model year 01, the bore −arrow− must also be drilled in
the wheel housing liner behind (drill 8mm through the existing bore).
2. Mount the air guide in the same manner on the other side of the vehicle.
top of page
Installing rear air guides
01 Installing air guides for PCCB brake discs − GT2 1804