Camber/Toe, Rear Axle; Instructions For Fitting Diagonal Control Arm On Control Arm Gt2 - Porsche 996 TT Repair Manual

Camber/toe, rear axle

As with the 911 Turbo (996), the wheel−alignment values on the rear axle are set at the toe eccentric −A−
and at the camber eccentric −B− .
top of page
Instructions for fitting diagonal control arm on control arm
GT2
Note
• In the case of the road version of the GT2 (M002 and M003), the diagonal control arm must be fitted
at the centre bore (No. 1) of the control arm.
Control arm, left
A Control arm, left
C Direction of travel
1 Centre bore for GT2 road model
2 Rear bore only for Cup vehicle (with racing circuit camber
values)
Camber/toe, rear axle
einordnung
1831