Porsche 996 TT Repair Manual page 2022

No. Designation Qty. Removal
1 Electrical plug 1
connection
2 Cable retainer 1
3 Fastening 4
screws
4 Rear lid 1
Removing and installing rear lid
einordnung
Press the lug −arrow A− of
the electrical plug connection
−1− and separate.
Press and open the lugs of the
cable retainer −2− . Remove
electrical wire.
Unscrew fastening screws.
Installation
Connect electrical plug connection −1− .
Insert the electrical wire into the cable
retainer −2− and close the cable retainer.
Ensure that the lugs have engaged correctly.
Tightening torque: −10 Nm (7.5 ftlb.)−
Adjust lid −3− to the hinges in accordance
with the contours of the wings and the rear
spoiler => Diagram − body gap dimensions
1959