Maintenance - OGI TotalArc BMS 460346 SOLAR POWER Operator's Manual

STANDARD SYSTEM MAINTENANCE CHECKS:
a) Visual inspection of the entire System.
b) If the odor of natural gas is detected, carefully leak test the associated equipment and piping.
Repair leaks as necessary.
c) Inspect and clean burner and pilot assembly.
d) Inspect and clean ground connection at pilot assembly.
e) Visually check the Control Panel and instrumentation for moisture, condensation, connections,
etc.
f) In Northern locations where snow accumulation could be a problem, clear snow from Solar
panel.
g) Check Battery Voltage.
OGI ACCEPTS NO RESPONSIBILITY FOR REPAIRS MADE BY NON-FACTORY AUTHORIZED
NATURAL GAS IS A DANGEROUS SUBSTANCE - APPROPRIATE PRECAUTIONS MUST BE TAKEN

MAINTENANCE

ALL REPAIRS MUST BE MADE BY A QUALIFED TECHNICIAN.
PERSONNEL.
TO AVOID ACCIDENTS.
REPAIRS
10