Ricoh Aficio SP C210 Setup Manual page 8

! Keep the machine in an area that is within optimum environmental conditions.
Operating the machine in an environment that is outside the recommended ranges of
humidity and temperature can cause an electrical fire hazard. Keep the area around
the socket free of dust. Accumulated dust can become an electrical fire hazard.
! Place the machine on a strong and level surface. Otherwise, it might fall and injure
someone.
! If you use the machine in a confined space, ensure there is continuous air circulation.
When pulling the paper tray out, be careful not to pull it strongly. If you do, the tray
!
might fall and cause an injury.
!
Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an
injury.
! This product uses low frequency electromagnetic fields and may cause harmful
interference to sensitive medical implant devices. If you have a cardiac pacemaker or
implantable defibrillator, please consult your doctor for additional suggestion or advice.
! When moving the machine, hold the inset grips at both sides, and then lift the printer
slowly. Lifting it carelessly or dropping it may cause an injury.
! Before moving the machine, unplug the power cord from the wall outlet. If the cord is
unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an
electrical or fire hazard.
Grip the plug, not the cord, when pulling the plug from the socket. Pulling the cord
!
causes wear and tear that can result in fire or electric shock.
! When moving the printer after use, do not take out any of the Toners, Belt Cartridge,
nor the Waste Toner Bottle to prevent toner spill inside the machine.
! When lifting the machine, use the grips on both sides. The machine could break or
cause on injury if dropped.
! Before moving the machine, unplug the power cord from the wall outlet. If the cord is
unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an
electrical or fire hazard.
! Our products are engineered to meet the highest standards of quality and
functionality. When purchasing expendable supplies, we recommend using only those
specified by an authorized dealer.
Avoid getting toner on your clothes or skin when removing a paper jam or replacing
!
toner. If your skin comes into contact with toner, wash the affected area thoroughly
with soap and water.
! If toner gets on your clothing, wash with cold water. Hot water will set the toner into
the fabric and may make removing the stain impossible.
! Wait at least one hour after power off before replacing parts. Not allowing the printer
to cool may result in burns.
! To prevent an injury, this printer should be lifted by at least two people.
CAUTION
Safety-4