Mount Into The Dashboard - Philips CID3681/93 User Manual

2
Stick the other end of the GPS antenna to
a surface for signal reception.
Connect GPS antenna
If your car has built-in radio antenna, connect
it to the radio antenna of the system for
better radio signal.
1
Connect the radio antenna to the car
antenna.
2
Stick the other end of the GPS antenna to
a surface for signal reception.

Mount into the dashboard

Note
Check wire connection before you mount the
unit into a car.
1
Install the tracks to the unit with the
supplied screws.
2
Remove the trim plate and slide the unit
along the guide track into the car.
3
Fix the unit to the dashboard with screws
(supplied by the car manufacturer).
4
Attach the trim plate.
5
Reconnect the negative terminal of the
car battery.
EN 11