Table of Contents
Advertisement
8
White and
white/black
wires
9
Gray and
gray/black
wires
0
Purple and
purple/black
wires
2
Connect the other end of the two ISO
connectors to the car audio system.
3
If necessary, do the other connections.
Connect GPS antenna
To receive signal from satelite, you need to connect
the supplied GPS antenna to your car and the
system.
1
Connect the supplier GPS antenna to the
2
Stick the other end of the GPS antenna to a
surface for signal reception.
Connect radio antenna
If your car has built-in radio antenna, connect it to
the radio antenna of the system for better radio
signal.
1
Connect the radio antenna to the car
antenna.
Mount in the dashboard
Note
Check wire connection before you mount
the unit into a car.
1
Take off the trim plate of the car.
2
Install the mounting brackets of the car to
the unit with screws (supplied by the car
manufacturer).
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)
2
3
4
3
Fix the mounting brackets to the car.
4
Attach the trim plate.
5
Reconnect the negative terminal of the car
battery.
Turn on
Caution
Risk of road accidents! Never watch video or
b
adjust settings while you drive.
c
1
Press and hold /MUTE/VOL to turn on the
unit.
»
languages are displayed.
2
Touch a language to select.
»
selected language immediately.
To turn off the unit, press and hold /MUTE/
VOL.
Set date and time
1
Touch the upper left corner to display main
menu.
2
Touch in the middle right side of the screen.
»
3
Touch [Settings].
4
Touch [Time].
»
The available OSD (On-Screen Display)
The OSD language is changed to the
The second main menu is displayed.
The date/time setup menu is displayed.
Advertisement
Table of Contents
