Connect Gps Antenna; Connect Radio Antenna; Mount In The Dashboard; Set Date And Time - Philips CID3681/93 Quick Start Manual

Philips car entertainment system cid3681
Hide thumbs Also See for CID3681/93:
Table of Contents

Advertisement

0
Purple and
purple/black
wires
2
Connect the other end of the two ISO
connectors to the car audio system.
3
If necessary, do the other connections.

Connect GPS antenna

To receive signal from satelite, you need to connect
the supplied GPS antenna to your car and the
system.
1
Connect the supplier GPS antenna to the
2
Stick the other end of the GPS antenna to a
surface for signal reception.

Connect radio antenna

If your car has built-in radio antenna, connect it to
the radio antenna of the system for better radio
signal.
1
Connect the radio antenna to the car
antenna.

Mount in the dashboard

Note
Check wire connection before you mount
the unit into a car.
1
Install the tracks to the unit with the supplied
a
screws.
2
Remove the trim plate and slide the unit
along the guide track into the car.
3
Fix the unit to the dashboard with screws
(supplied by the car manufacturer).
4
Attach the trim plate.
5
Reconnect the negative terminal of the car
battery.
Right speaker (Rear)
2
3
4
b
c
Turn on
Caution
Risk of road accidents! Never watch video or
b
adjust settings while you drive.
c
1
Press and hold /MUTE/VOL to turn on the
unit.
»
languages are displayed.
2
Touch a language to select.
»
selected language immediately.
To turn off the unit, press and hold /MUTE/
VOL.

Set date and time

1
Touch the upper left corner to display main
menu.
2
Touch in the middle right side of the screen.
»
3
Touch [Settings].
4
Touch [Time].
The available OSD (On-Screen Display)
The OSD language is changed to the
The second main menu is displayed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cid3681

Table of Contents