Table of Contents
Advertisement
Cleaning
Always disconnect the AC power cable before cleaning or servicing the chassis.
Caution
Exterior Cleaning
Cautions
Avoid getting moisture inside the chassis during exterior cleaning, especially
through the top vents.
Do not wash the front- or rear-panel connectors or switches. Cover these components while
cleaning the chassis.
Do not use harsh chemical cleaning agents; they may damage the chassis. Avoid chemicals
that contain benzene, toluene, xylene, acetone, or similar solvents.
Specifications
Electrical
1
Operating range is guaranteed by design.
NI 8352/8353 Installation Guide
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a
soft-bristle brush. Do not use abrasive compounds on any part of the
chassis.
This section lists the NI 8352/8353 electrical, mechanical, and
environmental specifications.
AC Input
Input voltage range .................................100–240 VAC
Operating voltage range
Input frequency.......................................50/60 Hz
Operating frequency range
Input current rating .................................5 A max
Power disconnect ....................................The AC power cable provides
1
........................90–264 VAC
1
....................47–63 Hz
main power disconnect.
Depressing the front panel power
switch enables or inhibits the
internal power supply.
16
ni.com
Advertisement
Table of Contents
