Table of Contents
Advertisement
Reset
When the unit hangs up, you can reset it.
1
Press RESET with a ball-point pen or
similar tool.
Tip
When the unit is reset, all the settings remain
unchanged.
Remove the unit
To repair, replace fuse, or replace the unit
with another car audio, remove it from the
dashboard.
1
Screw off the screws on the left/right side
of the unit.
2
Pull the unit out from the dashboard.
28
EN
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (15A).
4
Replace the fuse.
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
Advertisement
Table of Contents
