Philips CID3289/00 Quick Start Manual

Register your product and get support at
www.philips.com/welcome
ENG Quick Start Guide
4
5
CID3289
1
a b
c
d
3
English
To turn off the unit, press
Install the car audio
1 Set date and time
1
1
Press MENU.
If the car does not have an on-board drive
or navigation computer, disconnect the »
negative terminal of the car battery.
2
Take out the original car audio and keep
the screws.
3
Mount the supplied mounting brackets
onto the unit with the supplied screws. a
4
2
Connect wires .
5
Take off the two screws on the top side of
the unit. b
6
Slide the unit into the dashboard until a 2
Tap [Settings].
click sound is heard. c
3
Tap [Time].
7
Fix the unit onto the dashboard with
»
screws. d
8
Reconnect the negative terminal of the car
battery.
Turn on
Caution
Risk of road accidents! Never watch video or
Set date
adjust settings while you drive.
1
Tap [Date].
2
1 Tap the displayed date information.
Press to turn on the unit.
»
»
The available OSD (On-Screen Display)
3
languages are displayed. Tap
Set time mode
1
Tap [Time Mode].
2
Tap [12H] or[24H] to select clock mode.
Set time
1
Tap [Time].
2
Tap the displayed time.
»
3
Tap
2
Tap a language.
»
The OSD language is changed to the
selected language immediately.
2
Yellow
Gearbox
for 3 seconds.
Adjust screen
To turn off the screen
1
Press DISP for over 2 seconds.
To adjust screen brightness
1
The main menu is displayed. Press DISP.
2
Rotate TUNE/ SELECT to adjust the
value.
Use map
Note
You may need to upgrade the map (sold
separately) before using it (see "Upgrade the
map" section)
1
The date/time setup menu is displayed. Tap the upper left corner to display home
menu.
2
Tap [Navigation].
»
The navigation menu is displayed in a
few seconds.
3
Refer to the map manual to operate the
navigation tool.
Listen to Radio
1
Tap to display home menu.
2
Tap [Radio].
A submenu is displayed.
»
Band and frequency information is
or to set year, month and day.
displayed.
A submenu is displayed.
or to set hour and minute.
3
Tap on FM or AM to select band:
4
or to tune to a radio station
by step.
Green Blue
SANYO
CD/VCD/DVD CHANGE
AV system AV system
AUX AUX
Play disc 3 Play with Bluetooth device
You can play video, audio or images stored on the
following discs:
Pair the Bluetooth-enabled devices
DVD video, DVD-R, DVD-RW
To connect your Bluetooth device to the unit, you
VCD
need to pair the device to the unit. Pairing needs
Audio CD, CD-R, CD-RW
only to be done once.
1
Insert the disc into the disc slot with label
You can pair up to eight devices.
side facing up.
1
Search for Bluetooth device with the device.
»
Play starts automatically.
2
Select "CID3289" in the pairing list.
»
To remove the disc, press the button.
3
Enter default password "0000".
»
if pairing succeeds. phone call record is
displayed.
Connect USB device 4
1
Open the USB/SD card door.
2
Insert the USB device to the USB socket.
» Play starts automatically.
Note
To remove the USB device, switch to disc,
Make a call
1
Pair the phone with the unit.
Insert SD/MMC card
5
2
Tap
3
Tap [Bluetooth].
1
Open the USB/SD card door.
»
The Bluetooth menu is displayed.
2
Insert the SD/MMC card into the SD/MMC
card slot.
»
Play starts automatically.
Remove the SD/MMC card
1
Switch to another source.
2
Press the card until you hear a click sound.
» The card is now disengaged.
4
Tap
3
Remove the SD or MMC card.
tap
5
Tap
from the following list:
Yellow
Rear display
Yellow
Rear display
Radio antenna
GPS antenna
Optional accessory
Optional accessory
SUB. W
REAR R
REAR L
FRONT R
FRONT L
Amplifier
Or tap to dial number directly, then tap
to dial.
Receive call
By default, all incoming calls are received
automatically.
1
If there is incoming call, [Incoming call...]
Bluetooth microphone.
to display the home menu.
2
When conversation ends, tap (red) to
terminate the call.
or to select the paired phone, then
.
or to search for phone number
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CID3289_00_QSG_V1.0