Install Remote Control Battery; Turn On; Set Clock - Philips CEM5000/55 User Manual

5
Push the front side of the panel backward to
the main unit a "click" is heard.

Install remote control battery

Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
•
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
•
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

1
Press to turn on the unit.
• To turn off the unit, press
seconds.

Set clock

1
Press MENU repeatedly until [TIME
FORMAT] (time format) displays.
2
Use rotary encoder knob to toggle the
settings:
• [TIME FORMAT 12H]
• [TIME FORMAT 24H]
3
Press or repeatedly until [CLOCK
SET] (clock set) displays.
»
Hour digits blinks
4
Set hour with rotary encoder knob.
5
Press OK/MUTE to confi rm.
»
Minute digits blinks
6
Set minute with rotary encoder knob.
7
Press to confi rm clock set and exit the
menu.
for 3
EN 15