7 Adjust sound
VOLUME +/-on the remote control.
Or rotate encoder knob on the front
You can turn off the sound of your audio.
During play, press OK/MUTE.
To turn the sound back on, press
Turn DBB and subwoofer on/
DBB/SUB-W repeatedly to toggle
between the options below:
" [DBB ON] : The Dynamic Bass Boost
(DBB) function is on.
" [DBB OFF] : The DBB function is off.
Press and hold
DBB/SUB-W to access
the subwoofer settings:
" [SUBWOOFER On]: subwoofer
function is on.
" [SUBWOOFER Off]: subwoofer
function is off.
Select preset equalizer
The current Equalizer setting is
Press EQ/Audio again repeatedly to
select a preset EQ:
[FLAT] (ﬂ at)
Other sound settings
You can also edit user preset EQ.
Press EQ repeatedly on the remote
control to select the items to be adjusted:
[BASS LEVEL] (bass level) range: -7
[BASS CFQ] (bass center frequency)
range: 60H, 80H, 100H, 200H.
[MIDDLE LEVEL] (middle level)
range: -7 to +7.
[MIDDLE CFQ] (middle center
frequency) range: 1.0K, 1.5K, 2.5K,
[TREBLE LEVEL] (treble level) range:
-7 to +7.
[TREBLE CFQ] (treble center
frequency) range: 10K, 12.5K, 15K,
[BALANCE] (balance) range: 12L
to 12R. (L = left speaker, R = right
[FADER] (fader) range: 12R to 12F.
(R = rear speaker, F = front speaker)
[SUBWOOFER LEVEL] (subwoofer
level) range: 0 to 12
[SUBWOOFER LPF] (subwoofer
low pass ﬁ lter) range: 80, 120, 160
[RESUME] (resume): Resume the
preset EQ value to factory default
Rotate encoder knob to adjust value.