Detach The Front Panel; Install Remote Control Battery; Attach The Front Panel - Philips CED230/55 User Manual

5
Attach the trim plate.

Attach the front panel

1
Insert the notch on the front panel to the
chassis on the main unit.
2
Press the left end of the front panel
inwards until it is securely locked with a
"click".
10 EN

Detach the front panel

Note
•
Before you detach the front panel, make sure that the
system is turned off.
1
Press to release the front panel.
2
Pull the front panel leftward to release it
from the chassis of the main unit.
3
Pull the front panel outwards to remove it.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/percholorate.
For first time use
To replace the remote control battery
1
2