Register your product and get support at CEM5000 EN Quick Start Guide...
English Overview of parts 1 These are the supplied parts needed to connect and install this unit. a In-car audio system and sleeve b Front panel c Standard connector d Trim plate e Rubber cushion f Disassembly tools g Screws (4 pieces) Connect wires Caution •...
Remove the two screws on the top of the unit. Remove the mounting sleeve with the sup- plied disassembly tools. Ensure that car dashboard opening is within these measurements. Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. Place the supplied rubber cushion over the end of the mounting bolt.
Turn on bluetooth function on the device. Search for other bluetooth devices that can pair with your device. Select “Philips” in the pairing list. Enter default password “0000”. » [Paired Ok!](paired ok) displays on the panel if pairing is successful.