Table of Contents
Advertisement
Replace fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the
damaged fuse (5A)
4
Replace the fuse.
Note
•
If the fuse gets damaged immediately after it
has been replaced, there may be an internal
malfunction. In such case, consult your Philips
dealer.
30
EN
13 Product
information
Note
•
Product information is subject to change
without prior notice.
General
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Aux-in level
Dimensions
(W x H x D)
Weight (main unit) 2.5 kg
Disc player
System
Frequency response
Signal/noise ratio
Total harmonic
distortion
Channel separation
Video signal format
Video output
12 V DC (11 V - 16 V),
negative ground
5 A
4 - 8
50 W x 4 channels
22 W x 4 channels (4
10% T.H.D.)
2.0 V ( CD play mode; 1
kHz, 0 dB, 10 k
load)
500 mV
288.7 x 302.4 x 185 mm
DVD / CD audio /
MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>55dB
NTSC only
1 +/- 0.2V
Advertisement
Table of Contents
