R
» When
blinks with
zone] displayed, the current control
interface is for the rear source.
Use buttons on the
steering wheel
You can assign a function to a button
on the steering wheel, and then control
the system with that button.
1
Tap
>
to access the full menu
with all feature icons displayed.
2
Tap
.
» The [Steering Wheel Remote
Control Learning] interface is
displayed.
3
Tap an icon, for example,
, of which you want to assign the
function to a button on the steering
wheel.
•
To cancel the assignment, tap
[Cancel].
and [Rear
4
Press and hold the button on the
steering wheel for one second.
» The following interface is
displayed.
5
Repeat steps 3 and 4 to assign
more functions to buttons on the
steering wheel.
•
To clear the assignment, tap
[Clear All].
Reset the system
If the system hangs up, reset it.
1
Flip up the protective cover.
2
Press RESET with the tip of a ball-
point pen or toothpick.
Replace the fuse
If there is no power, check the fuse and
replace it if it is damaged.
1
Detach the main unit from
dashboard.
2
Check the electric connection.
EN
39