Reset The System; Replace The Fuse - Philips CED1500BT User Manual

Reset the system

If the system hangs up, reset it.
1
Flip up the protective cover.
2
Press RESET with the tip of a ball-point
pen or toothpick.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Detach the main unit from dashboard.
2
Check the electric connection.
3
Remove the damaged fuse from the rear
panel.
4
Insert a new fuse with the same
Tip
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In this case,
consult your retailer.
Note
Power supply must not be interrupted during the
upgrade.
restored to the factory default status.
EN
24
Register your product
1
Go to www.philips.com/welcome.
2
Click the link of "Register my product"
(the exact wording of this link name may
vary in different languages).
3
Log in with your account on the prompt
Web page.
If you have no account for Club Philips,
4
Search your product with
"CED1500BT/98" as the keyword.
5
Click the link of search result to access the
Web page for registering your product.
6
Fill in necessary information about this
product to complete the registration.
» With the registration, you can get
information about software update and
product support at this Web page or
via your mailbox that is registered as
the account for Club Philips.
Perform the upgrade
1
system.
2
Go to www.philips.com/support.
3
Login with your account for Club Philips.
» Support information about your
registered product is displayed.
4
Click the link of "Firmware Upgrade
Readme File" (the exact wording of this
link name may vary in different languages).
5
Read and understand the instructions on
6
Follow the instructions to download the
upgrade packet and complete the upgrade.
If the upgrade fails, reboot this system,
and then perform the upgrade again.