Use - ALDI AMBIANO GT-DFM-01-UK User Manual

Use

USE
WARNING!
Electric shock hazard! Ensure that the power cable cannot
come into contact with the hot parts of the fryer.
1. Open the lid by pressing the release button
2. Remove the frying basket
3. Fill the dry and clean frying tank
melted fat (approx. 1.5 L).
Pay attention to the MIN and MAX marks
frying tank. Do not exceed the MAX mark during
fi lling and do not fall below the MIN mark.
4. Close the lid
into place.
5. Make sure that on/off switch / temperature controller
turned counter-clockwise to MIN.
6. Connect the power plug to the power supply.
7. Rotate the on/off switch / temperature controller
clockwise direction to the required temperature.
The red indicator lamp
the power supply and the heating-up process. After
the pre-selected temperature is reached, the lamp goes
out and lights up again after a short time = compensation
of heat loss.
The lid and the housing of the fryer become very hot
during operation. Use oven gloves, if you are inserting
or removing a basket.
22
Only connect the fryer to the power supply
before the heating process.
1 by folding it down until you hear it click
12 , if applicable.
10
8 shows the connection to
7 .
with oil, liquid or
4 in the
9
9 is
in a