Dc Power Supply Specifications; Installing The Avaya Virtual Services Platform 4000 Power Supply - Avaya VSP 4850GTS Series Installing

Installing the Avaya VSP 4000 4850GTS Series
Table 12: Avaya VSP 4450GSX-PWR+ model
Maximum PoE+ W
835 W with one power supply
1835 W with two power supplies

DC power supply specifications

The following table describes the DC power supply specifications for the VSP 4000.
Table 13: DC power supply specifications
Description
Output power
Input voltage
Input current
Output voltage
Output current
Installing the Avaya Virtual Services Platform 4000 power
supply
You must install at least one power supply before using the switch. Avaya VSP 4000 PWR+ models.
Avaya VSP 4000 models support two field replaceable external power supplies. If supported, you
can install an optional second power supply for redundancy, load sharing, or to provide additional
PoE+ power budget.
Perform the following procedure to install an external power supply into your switch.
Note:
Avaya VSP 4000 hardware can vary. This procedure only applies to hardware models with field
replaceable power supplies.
1. If a blanking plate covers the required power supply slot, remove the blanking plate before
attempting to insert the power supply.
2. Insert each power supply into a front power supply slot.
3. Verify that each power supply is fully seated in the slot. Secure the power supply with the
two thumb screws.
May 2016
Average PoE+ W on 12 ports
17.8 W or 32.4 W (802.3.at) — One power supply
Installing Avaya Virtual Services Platform 4850GTS Series
Comments on this document? infodev@avaya.com
DC-DC-12V-300 W
300 W
48 V DC
10 A
12 V DC
25 A
32