Connect Power To The Rear Panel - Avaya VSP 4850GTS Series Installing

Installing the Avaya VSP 4000 4850GTS Series
Country and Plug Specification
Australia:
• AS3112-1981 male plug
Danger:
Using power cords with a proper grounding path
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions. For a translation of this statement, see
safety messages

Connect power to the rear panel

Connect the AC power cord to the rear of the switch, and then connect the cord to an AC power
outlet. The following figure shows how to connect the AC power cord to the switch rear panel.
Important:
The Avaya VSP 4000 series has no AC power switch. When you connect the power cord to a
suitable, energized AC power outlet, the switch powers up immediately.
Figure 6: Connecting AC power to the rear panel
May 2016
on page 41.
Installing Avaya Virtual Services Platform 4850GTS Series
Comments on this document? infodev@avaya.com
Specifications
• 240VAC
• 50 Hz
• Single phase
Typical Plug
Translations of
34