Harman P35i-C Owner's Manual
Harman P35i-C Owner's Manual

Harman P35i-C Owner's Manual

Pellet insert
Hide thumbs Also See for P35i-C:

Advertisement

Quick Links

INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your local dealer with questions on installation, operation or service.
NOTICE: SAVE THESE INSTRUCTIONS
Model(s):
P35i-C Pellet Insert
!
Check building codes prior to installation.
• Installation MUST comply with local, regional, state and
national codes and regulations.
• Contact local building or fire officials about restrictions
and installation inspection requirements in your area.
!
Tested and approved for wood pellets only burning of
any other type of fuel voids your warranty. When burning
higher ash content pellets more frequent cleanings may
be required.
1
Owner's Manual

Care and Operation

CAUTION
CAUTION
Harman® • P35i-C Owner's Manual_R3 • 2019 -___ • 03/20
!
Please read this entire manual before
installation and use of this pellet fuel-
burning room heater.
Failure to follow these instructions could
result in property damage, bodily injury
or even death.
• Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
• Do not overfire - If any external part starts to glow, you
are overfiring. Reduce feed rate. Overfiring will void
your warranty.
• Comply with all minimum clearances to combustibles
as specified. Failure to comply may cause house fire.
!
HOT SURFACES!
Glass and other surfaces are hot during
operation and cool down.
Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as
stove.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other
flammable materials.
• Keep clothing, furniture, draperies and other flammable
materials away.
NOTE
To obtain a French translation of this manual, please
contact your dealer or visit www.harmanstoves.com
Pour obtenir une traduction française de ce manuel, s'il
vous plaît contacter votre revendeur ou visitez www.
harmanstoves.com
WARNING
WARNING
8390-784C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P35i-C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Harman P35i-C

  • Page 1: Care And Operation

    When burning Pour obtenir une traduction française de ce manuel, s’il higher ash content pellets more frequent cleanings may vous plaît contacter votre revendeur ou visitez www. be required. harmanstoves.com Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 2 DATE: 12/04/19 INK: Black Background (1) Hole = Ø.188 352 Mountain House Road Hole location from side edge - 8.875 Halifax, PA 17032 Hole location from Btm edge - .9735 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 3: Table Of Contents

    • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 4: Appliance Certification / Specifications

    This wood heater needs periodic inspection and repair for specifications and/or price without notice. proper operation. It is against federal regulations to operate this wood heater in a manner inconsistent with operating Harman is a registered trademark of Hearth & Home ® instructions in this manual. Technologies. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 5: Appliance Safety

    MINIMUM LOW BURN RATE THAT MUST NOT BE ALTERED. IT IS AGAINST FEDERAL REGULATIONS TO ALTER THIS SETTING OR OTHERWISE OPERATE THIS WOOD HEATER IN A MANNER INCONSISTENT WITH OPERATING INSTRUCTIONS IN THIS MANUAL. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 6: Helpful Hints

    • Damp pellet fuel could turn back into sawdust which connection to the appliance is necessary. does not flow properly through the feed system. Vent leakage - All interior seams and joints should be sealed with silicone where applicable. Follow vent manufacturers instructions for proper sealing. CAUTION This appliance must be vented to the outside Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 7 Odors and vapors released during initial operation. • Curing of high temperature paint. • Open windows for air circulation. Odors may be irritating to sensitive individuals. CAUTION Tested and approved for use with wood pellets ONLY. Burning of any other fuel will void your warranty. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 8: Frequently Asked Questions

    Ensure holes in burnpot are clear of obstructions above the igniter. See Burnpot Maintenance. Check to see if the ignitor is getting hot, if not replace ignitor. *See addendum for manual ignition instructions for emergency heating needs. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 9: Maintenance And Service

    YOU VACUUM THE STOVE. LIVE PELLET EMBERS, IF SUCKED INTO THE VACUUM, WILL LIGHT THE VACUUM • Risk of shock if appliance not unplugged before ON FIRE AND MAY ULTIMATELY CAUSE A HOUSE FIRE. servicing appliance. Follow the detailed instructions found in this section for each step listed in the chart below. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 10: Quick Reference Maintenance Chart

    4. Yearly cleaning is also known as a Total Clean. This requires completing all the Daily, Weekly, Monthly and Yearly maintenance mentioned. This should be done before you begin burning the unit each heating season. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 11: Unit Maintenance

    • Clean ash buildup from inside the chamber while cover is off. Use the scraper to tap on the top front edge of the burn pot. This will help knock pieces of ash, loosened by the scraping process, down through the holes. It also helps knock ash buildup from the igniter element and bracket. Scrape the heat exchanger free of Fly-Ash and carbon build-up Figure 2.2 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 12: Yearly Maintenance

    7. With this cover removed, you can vacuum the paddle fan and the inside of the chamber. Be careful not to bend the blades on the paddle fan. Wing Screw - (1) Located on each Cleanout Cover Figure 2.6 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 13 9. Whenever the hopper is empty, inspect and remove any large amounts of sawdust or fines. Although this finer material will mostly feed through with the fuel, large quantities of sawdust may restrict feeder flow. Adhesive gasket Figure 2.14 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 14 Once the unit is shut down and cooled, unplug the unit from its power supply. Behind each side panel release (1) spring latches that holds the unit to the inserts cage. Figure 2.16. Spring Latch Figure 2.16 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 15: Reference Materials

    P35i-C Pellet Insert Service Parts Beginning Manufacturing Date: Jan 2020 Pellet Insert Ending Manufacturing Date: Active 1-70-784195-1 (Black, 19.5 inch) 1-70-784235-1 (Black, 23.5 inch) Part number list on following page. 03/20 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 16 Screw, PHM 8 X 1/2 Black Pkg of 100 3-30-5000-100 Standard 1-10-774221 Surround Right Oversize 1-10-774249 Control Board Mount 1 Set 1-00-774251 Wing Splices Set of 2 2-00-774178-2 Additional service parts on following page. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 17 1-00-06623 Wingscrews, 1/4-20 x 5/8 Pkg of 10 3-31-782108-10 Flame Guide 3-00-03000 Flame Guide Extension 1-00-774338 Cleanout Cover Set Left & Right 1-00-774213 Additional service parts on following page. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 18 Pop Rivets, 1/8” Black Pkg of 100 3-30-1104-100 Roller Hardware 4 Sets 1-00-05232 Room Sensor 3-20-00906 Touch up Paint, Black 3-42-19905 Wiring Harness 3-20-08727 Additional service parts on following page. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 19 Pkg of 100 3-30-8005-100 27.19 Grommet-1/2 in ID-Thick Pkg of 12 3-31-2761-12 27.20 Gasket Hopper Throat 3-44-677185 Gasket, Snout Pkg of 10 3-44-677160-10 Hopper Switch Feeder Fitting Pkg of 2 1-00-142818 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 20: Limited Lifetime Warranty

    (engine, inner cover,access cover and fireback) 1 Year None All replacement parts beyond warranty period See conditions, exclusions and limitations on the next page Page 1 of 2 4021-645K 1/20 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 21 EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY SPECIFICED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE EXPRESSED WARRANTY SPECIFIED ABOVE. 4021-645K 1/20 Page 2 of 2 Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 22: Loss Of Power Addendum

    • If the fire is still burning, it will resume normal 3. Fill burn pot with pellets, only half way. (Do Not Over Fill). operation. 4. Add firestarter to pellets following manufacturer’s Contact your dealer if you have questions about UPS instructions. compatibility with your appliance. 5. Light pellet gel with a match, and close the door, touch the On/Off icon on the home screen. Operation will begin when the fire reaches the proper temperature. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 23: Troubleshooting

    • Air-fuel ratio is too rich. - Feed rate too high. - Draft too low caused by a gasket leak. Low heat output • Feed rate too low • Draft too low because of gasket leak. • Poor quality or damp pellets • Combination of 1 and 2. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...
  • Page 24: Contact Information

    Printed in U.S.A. Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20 8390-784C...

Table of Contents