Harman P43 Owners Manual Care And Operation
Hide thumbs
Also See for P43:
- Owner's manual (44 pages) ,
- Installation & operating manual (40 pages) ,
- User manual (40 pages)
Table of Contents
Advertisement
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your local dealer with questions on installation, operation or service.
NOTICE: SAVE THESE INSTRUCTIONS
P43, P61A & P68
Freestanding Pellet Stove
P43
Use & Care Video
Use & Care Video
P68
Use & Care Video
Tested and approved for wood pellets and or a mixture of
up to 50% shelled field corn mixed with a minimum of 50%
wood pellets, burning of any other type of fuel voids your
warranty. When burning pellet/corn blends more frequent
cleanings may be required.
Check building codes prior to installation.
• Installation MUST comply with local, regional, state and
national codes and regulations.
• Contact local building or fire officials about restrictions
and installation inspection requirements in your area.
1
Owner's Manual
Care and Operation
Model(s):
P61A
!
CAUTION
!
CAUTION
Harman® • P-Series Owner's Manual_R10 • 2014 - ___ • 11/15
Please read this entire manual before
installation and use of this pellet fuel-
burning room heater.
Failure to follow these instructions could
result in property damage, bodily injury
or even death.
• Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
• Do not overfire - If any external part starts to glow, you
are overfiring. Reduce feed rate. Overfiring will void
your warranty.
• Comply with all minimum clearances to combustibles
as specified. Failure to comply may cause house fire.
WARNING
HOT SURFACES!
Glass and other surfaces are hot
during operation AND cool down.
Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as
stove.
• Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other
flammable materials.
• Keep clothing, furniture, draperies and other flammable
materials away.
NOTE
To obtain a French translation of this manual, please
contact your dealer or visit www.harmanstoves.com
Pour obtenir une traduction française de ce manuel, s'il
vous plaît contacter votre revendeur ou visitez www.
harmanstoves.com
WARNING
3-90-436168c
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Harman P43
Summary of Contents for Harman P43
-
Page 1: Care And Operation
CAUTION To obtain a French translation of this manual, please Check building codes prior to installation. contact your dealer or visit www.harmanstoves.com • Installation MUST comply with local, regional, state and national codes and regulations. Pour obtenir une traduction française de ce manuel, s’il • Contact local building or fire officials about restrictions vous plaît contacter votre revendeur ou visitez www. and installation inspection requirements in your area. harmanstoves.com Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 2: Welcome
P.N. 3-90-04300 Rev G DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE loor protector LAbEL tiCkEt Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c ECO: 77540 CLASS: PARt # / REv: 3-90-04300_Rev G... -
Page 3: Table Of Contents
P43 ......... -
Page 4: Limited Lifetime Warranty
Igniters, electronic components, and glass 2 years Factory-installed blowers Molded refractory panels 3 years Firepots and burnpots 5 years 1 year Castings and baffles Manifold tubes, 7 years 3 years HHT chimney and termination 1 year Burners, logs and refractory years Limited 3 years Firebox and heat exchanger Lifetime All replacement parts 90 Days beyond warranty period See conditions, exclusions, and limitations on next page. 4021-645F 02-18-13 Page 1 of 2 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... - Page 5 This warranty is void if: • The appliance has been over-fired or operated in atmospheres contaminated by chlorine, fluorine, or other damaging chemicals. Over-firing can be identified by, but not limited to, warped plates or tubes, rust colored cast iron, bubbling, cracking and discoloration of steel or enamel finishes. • The appliance is subjected to prolonged periods of dampness or condensation. • There is any damage to the appliance or other components due to water or weather damage which is the result of, but not limited to, improper chimney or venting installation. LIMITATIONS OF LIABILITY: • The owner’s exclusive remedy and HHT’s sole obligation under this warranty, under any other warranty, express or implied, or in contract, tort or otherwise, shall be limited to replacement, repair, or refund, as specified above. In no event will HHT be liable for any incidental or consequential damages caused by defects in the appliance. Some states do not allow exclusions or limitation of incidental or consequential damages, so these limitations may not apply to you. This warranty gives you specific rights; you may also have other rights, which vary from state to state. EXCEPT TO THE EXTENT PROVIDED BY LAW, HHT MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS LIMITED TO DURATION OF THE EXPRESSED WARRANTY SPECIFIED ABOVE. 4021-645F 02-18-13 Page 2 of 2 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
-
Page 6: Product Specific And Important Safety Information
In the absence of local codes you must comply with the ASTM E1509-2004, ULC-S627-00, ULC/ORD-C- 1482-M1990, (UM) 84-HUD The P43, P61A and P68 are Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 7: Btu & Efficiency Specifications
****Based on the maximum feed rate per hour multiplied by approximately 8,600 BTU’s which is the average BTU’s from a pound of pellets. This wood heater needs periodic inspection and repair for proper operation. It is against federal regulations to operate this wood heater in a manner inconsistent with operating instructions in this manual. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 8: General Information
• Teach children to NEVER touch the stove. • Consider not using the stove when children will be present. • Use only specified components as replacement parts. Other components may not allow your stove to operate as it was intended. Contact your dealer for more information, or visit: www. hpba.org/safety-information. To prevent unintended operation when not using your stove for an extended period of time (summer months, vacations, trips, etc): • Unplug stove from receptacle. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 9: Control Explanation
Dealers exclusively. vary the distribution blower speed using the inner scale marked from 1 to 7. by turning the knob to the high or low side of each mode. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 10: Fuel Specification
Tested and approved for use with wood pellets ONLY. Moisture Burning of any other fuel will void your warranty. Always burn dry fuel. Burning fuel with high moisture content takes energy to dry and tends to cool the appliance thus, robbing heat from your home. Damp pellet fuel could NOTICE turn back into sawdust which does not flow properly through Hearth & Home Technologies is not responsible for stove the feed system. performance or extra maintenance required as a result of using fuel with higher ash or mineral content. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 11: General Operating Information
The appliance will turn on and off as the room sensor SIMILAR LIQUIDS TO START OR “FRESHEN UP” A FIRE demands. When the room sensor calls for heat, the appliance IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE HEATER WHILE IT IS IN USE. will always start up on High. After burning approximately 7-10 minutes, the appliance will then burn at the rate at which it • DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS SUCH was originally set. If the appliance is set at one of the lower AS GASOLINE, NAPHTHA OR ENGINE OIL. settings, it will run quieter but take longer to heat up an area • DO NOT USE CHEMICALS OF FLUIDS TO START THE than if it were set at a higher burn rate. FIRE. Regardless of the burn rate, when the area is warm enough • Combustible materials may ignite. to satisfy the room sensor, the appliance will shut off. Figure 3.1 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 12: Operating Instructions
CAUTION Figure 4.4. Set feed limit knob to desired setting and turn mode dial to “Room Temp” or “Constant burn” Figure 4.5. Odors and vapors released during initial operation. Note: Feed rate of #4 is a good starting point. Adjustments • Curing of high temperature paint. may need to be made depending on fuel quality and/or • Open windows for air circulation. heat output desired. Odors may be irritating to sensitive individuals. 5. The fuel feed system and the igniter should now be on. 6. Once the appliance has ignited, let it burn for approximately 7-10 minutes. After this time, the igniter light should turn off and the unit should begin to operate per the settings at the control. Figure 4.2 Figure 4.3 Figure 4.4 Figure 4.5 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 13: Ignition Cycles
• Within space required for loading or ash in accordance to what temperature the room sensor is removal. reading. When the room sensor is satisfied the blower will shut down until the room sensor sees a demand for heat. 3. Occasionally the appliance may run out of fuel and shut itself down. When this happens, the unit will need to be turned to the off position and restarted. If needed, follow the instructions in Section A “Starting Your First Fire”. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 14: Automatic Ignition
1" or less ash bed is not obtainable, it is not a problem. The 1" ash bed is only at maximum burn rate and during normal operation, the ash bed will be larger. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... - Page 15 Selector to “OFF”. This will cause the fire to diminish and burn out. When the fire burns out and the stove cools down everything will stop. If you pull the plug to shut down the stove, all motors will stop. This may cause incomplete combustion and smoke in the firebox. If the load door is opened, the smoke may escape. The best way to shut down the stove is simply let it run out of pellets, then the stove will shut down automatically. This setting will produce continuous maximum heat output with the distribution blower at full speed. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
-
Page 16: Proper Shutdown Procedure
At end of heating season Burnpot - Burning pellets - hardwood Every 3 bags Burnpot - Burning pellets - softwood Every 5 bags Glass When clear view of burnpot becomes obscure Hopper / Hopper Lid Gasket Every 50 bags of fuel or when changing fuel types Venting System More frequently depending on the fuel type NOTICE: These are recommendations. Clean more frequently if you encounter heavy build-up of ash at the recommended interval or you see soot coming from the vent. Not properly cleaning your appliance on a regular basis will void your warranty. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 17: Glass Maintenance
P43 & P61A Freestanding Pellet Stove Replace glass only with high temperature mirrored ceramic glass. Inspect door gasket during cleaning and inspection Glass Gasket P68 Freestanding Pellet Stove Glass Retainers and screws Door Frame Adhesive gasket Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 18: Burnpot Maintenance
Note: The hot lead/cold lead connection must always Figure 5.3 be pulled to the rear of the feeder body before Viewed from below through the ash pan opening. operation. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 19: Combustion Blower Chamber
The exhaust passage may need cleaned as well. Keep in mind the ESP Sensor is located just inside the exhaust Intake Retainer passage Figure 5.7. Be sure not to damage the ESP Sensor Combustion Intake Cover Figure 5.4 while cleaning this area. Exhaust Passage ESP Sensor Pull up on Intake Retainer Figure 5.5 Figure 5.7 Pull and slide to the right Figure 5.6 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 20: Pellet Feeder Chamber
NOTE: Views are shown with the rear motor covers removed. Feeder clean out cover 5/16" Wing Nut Figure 5.9 Pellet Metering Possible pellet fines Slide Plate buildup area. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 21: Troubleshooting And Frequently Asked Questions
Room Sensing Probe failed or not installed. If a Troubleshooting section for more details. Room Sensing Probe is then installed, the status light will automatically reset. * Manual reset- disconnect power cord for a few seconds and reconnect. If error still occurs call your Dealer. NOTE: Unit will not start in "AUTO" with this status error. 5 Blinks (In Igniter Auto. Mode Only): Indicates that the unit has failed to light within the 36 minute start cycle. To reset - Turn Mode Selector to "OFF", then turn to either mode again.) Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 22: Frequently Asked Questions
7. This is normal. Flame will settle down once the fire is established. Contact your dealer for additional information regarding operation and troubleshooting. Visit www.harmanstoves. com to find dealer. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 23: Troubleshooting
FIRE HAS GONE OUT- Check for status light. 1. No fuel in hopper. 2. Draft is too low, blocked flue. 3. Something is restricting fuel flow. 4. Hopper lid not closed properly. 5. Feed motor or combustion blower has failed. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 24: Reference Materials
If a fire occurs, call the fire department, shut down the stove, and evacuate the residence. Before using the appliance, have the venting system thoroughly inspected and replace any damaged components. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 25: Motor And Component Location
(Draft) in the firebox. If the high limit and one backup high limit. The control has an automatic draft becomes too low for proper combustion, the switch opens, diagnostic circuit that continuously monitors the ESP and Room cutting power to the feed motor and the igniter circuits. This switch Sensor for faults. If a fault should occur, the control sends a status is connected into the AC (high voltage) wiring. alert and at the same time the unit goes down to minimum feed/ minimum burn as a safety condition. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 26: Loss Of Power Addendum
4. Light pellet gel with a match, and close the door, turn Mode • If the fire is still burning, it will resume normal Selector to Constant Burn. Operation will begin when the operation. fire reaches the proper temperature. Contact your dealer if you have questions about UPS compatibility with your appliance. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... -
Page 27: Service Parts
Pre 008168147 1-10-08518 Hopper Lid w/Hinge, Knob Post 008168147 1-10-773900 Hopper Switch 48” Post 008084166 3-20-232108 Hopper Extension Switch Kit 1-00-06826 Additional service parts on following page. 10/15 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... - Page 28 Pkg of 2 1-00-142818 Motor Bracket Grommet Pkg of 12 3-31-2761-12 Pillow Block Pkg of 4 3-31-3614087-4 Silicone Tubing, 1/8” 5 Ft 1-00-5113574 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 29 Pkg of 10 1-00-939639 Arrow Burn Pot Scraper Pkg of 10 2-00-773850-10 Cradle Assembly Igniter Holder, Cradle, & Flat Bottom 3 Sets 1-00-06620 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 30 Brushed Stainless 3-43-08400-7 Bright Nickel 3-43-08400-8 Gold 3-43-06729-4 Tile Frame Brushed Stainless 3-43-06729-7 Bright Nickel 3-43-06729-8 Spring Clips (Required for installation of Tile Frame) Pkg of 20 3-31-232547-20 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
-
Page 31: P61A
Hopper Assembly Post 008085092 1-10-05803 Hopper Extension Switch Kit 1-00-06826 Hopper Knob Post 008093438 1-00-02000-1 Hopper Switch 48” Post 008087704 3-20-232108 Additional service parts on following page. 10/15 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... - Page 32 1-00-677150 Gasket, Feeder, Air Intake Pkg of 6 3-44-72224-6 Motor Bracket Grommet Pkg of 12 3-31-2761-12 Pillow Block Pkg of 4 3-31-3614087-4 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 33 Pkg of 2 1-00-142818 Motor Bracket Grommet Pkg of 12 3-31-2761-12 Pillow Block Pkg of 4 3-31-3614087-4 Silicone Tubing, 1/8” 5 Ft 1-00-5113574 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 34 Circuit Board w/Knobs & Shafts 1-00-05886 Circuit Board Plate, Studded w/label 1-10-08327 Control Panel Label 3-90-07766 Knob, Contol Board/D-Shaft 25 Sets 1-00-015605 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 35 Brushed Stainless 3-43-08400-7 Bright Nickel 3-43-08400-8 Gold 3-43-06729-4 Tile Frame Brushed Stainless 3-43-06729-7 Bright Nickel 3-43-06729-8 Spring Clips (Required for installation of Tile Frame) Pkg of 20 3-31-232547-20 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
-
Page 36: P68
1-10-06709 Hopper Assembly Post 008280309 1-10-00688 Hopper Extention Switch Kit 1-00-06826 Hopper Knob Post 008295042 1-00-02000-1 Hopper Switch Post 008284286 3-20-232108 Additional service parts on following page. 10/15 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c... - Page 37 1-00-677150 Gasket, Feeder, Air Intake Pkg of 6 3-44-72224-6 Motor Bracket Grommet Pkg of 12 3-31-2761-12 Pillow Block Pkg of 4 3-31-3614087-4 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 38 Pkg of 2 1-00-142818 Motor Bracket Grommet Pkg of 12 3-31-2761-12 Pillow Block Pkg of 4 3-31-3614087-4 Silicone Tubing, 1/8" 5 Ft 1-00-5113574 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 39 Fire Brick 4-1/2 x 9 x 1-1/4” Pkg of 7 1-00-900450125 Fire Brick , Full Skid 414 Pcs 3-40-900450-414 Hopper Heat Shield 2-00-06715B Feeder Opening Cover 2-00-773826L Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 40 Post 008281295 3-20-00844 Thermostat Extension 3-20-00607 Pre 008293174 3-42-1990 Touch up Paint, Black, 12 oz Can Post 008293174 3-42-19905 Wiring Harness 3-20-08727 Additional service parts on following page. Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
- Page 41 Brushed Stainless 3-43-08400-7 Bright Nickel 3-43-08400-8 Gold 3-43-06729-4 Tile Frame Brushed Stainless 3-43-06729-7 Bright Nickel 3-43-06729-8 Pkg of 20 3-31-232547-20 Spring Clips (Required for the installation of Tile Frame) Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
-
Page 42: Contact Information
• Leave this manual with a n d m a i n t e n a n c e these instructions for safe party responsible for use instructions included. installation and operation. and operation. Printed in U.S.A. - Copyright 2012 Harman® • P-Series Owner’s Manual_R10 • 2014 - ___ • 11/15 3-90-436168c...
Need help?
Do you have a question about the P43 and is the answer not in the manual?
Questions and answers