Getting Started; Usb® Fob Interface - FlowLine EchoPod DL14 Series Manual

Getting Started:

EchoPod is configured through WebCal, a PC software program. WebCal is a free download from
Flowline's website. You must download and install WebCal prior to plugging in the USB® Fob.
Please go to http://www.flowline.com, click on WebCal Software and select your language version.
USB® Fob Interface
EchoSonic communicates with WebCal through a USB® interface called a Fob. Before plugging
your Fob into your computer's USB® port, be sure that you have installed WebCal on your computer.
Connect the red, green, white and black wires from EchoPod into the correct terminals on the Fob.
Tighten the screws on the terminals and plug your Fob into the USB® port of your computer.
Wiring identical for all series
8 of 29
WebCal System Requirements
Windows® XP or 2000
10 mB hard drive space
256 mB RAM
1 USB® 2.0 port
Internet connection
EchoPod
MN204210
31 MAR 11
Rev B