12. Adjust the position of the green edge guides so that the media is guided with a
13. Close the front door and media cover. Make sure that the media runs through
Loading Media for Peel-Off Printing
In peel-off, or self-strip mode, self-adhesive labels are separated from the liner
immediately after printing. Peel-off printing:
•
•
•
•
PX4ie and PX6ie High Performance Printer User Guide
minimum of play.
the slot in the front door.
can only be used for self-adhesive labels with liner.
requires the optional peel-off assembly.
cannot be performed with the optional fanfold guide installed.
sets high demands on the media, such as label stiffness, release characteristics
of the adhesive and liner, and resistance against electrostatic charging. Consult
your media supplier or test the media to make sure that it is suitable for your
application.
17