Table of Contents
Advertisement
Set the Command Language from the Printer Webpage
To set the command language from the printer webpage, you need to turn on the
printer and connect to your Ethernet network.
1. Make sure that the printer has media and ribbon (if necessary) installed.
2. On your PC, open a Web browser.
3. In the Location or Address bar, type the printer IP address and press Enter. The
4. Click Login.
5. Type your Username and Password and click Login. the default username is
6. Click the Configure tab.
7. Click System Settings > General.
8. Select a different printer command language from the Command Language
9. Click the Services tab.
10. Click Reboot Printer, and then click Reboot. The printer restarts in the
Printer Options and Accessories
Options are either installed at the factory or by factory service technicians in the
field. Accessories are designed to be installed by the customer. Options and acces-
sories are sold separately.
Option/Accessory
Liner/Batch Takeup
Paper Cutter
Media Roll Retainer
76 mm (3-in)
Adapter
PX4ie and PX6ie High Performance Printer User Guide
printer webpage appears.
itadmin and the default password is pass.
list, and then click Save.
command language you selected.
Description
This factory-installed option separates labels
from the liner and windsup the spent liner inside
the printer's media compartment.
Use the paper cutter to cut through continuous
non-adhesive paper-based media or the liner
between labels.
If you are running Fingerprint or Direct Protocol,
you can control the paper cutter using the
commands CUT, CUT ON, and CUT OFF.
Use the media roll retainer with a rotating media
supply hub to keep large media rolls in place.
Use the 76 mm (3-in) adapter with a rotating
media supply hub to use media rolls with 76 mm
(3-in) inner diameter cores.
The adapter cannot be used with a media supply
roll post.
9
Advertisement
Table of Contents
