Removing - Mercedes-Benz GLE Hybrid 2019 Operator's Manual

Indicator Signal
lamp
= Charging has stopped as a
result of the mains plug over-
Flashes red
heating.
? A malfunction has occurred.
The high-voltage battery can-
Flashes red
not be charged.
intensely
The infrastructure has a mal-
function. The high-voltage
battery cannot be charged.
If the control detects residual current or a mal-
function, the charging process is halted. Once
the malfunction has been rectified the charging
process is resumed automatically.
For information on problems relating to the
charging process, see (
Setting the maximum charging current
G
WARNING
If the charge current draw via a mains socket
is too high during the charging process, the
external electrical system may overheat.
There is a risk of fire.
Before beginning the charging process, check
the maximum permissible charge current
locally. Consult a qualified expert to do so
where necessary.
If necessary, adjust your vehicle's settings.
!
An excessive charge current can blow a fuse
or lead to overheating of the external power
supply. Check whether the external power
supply is compatible with the set charge cur-
rent. If necessary, lower the set charge cur-
rent or use another power socket.
Before starting the charging process at a power
socket, check the maximum permissible charge
current for the relevant power socket or the
building.
Adjust the maximum permissible charge current
in the Sett. Sett. on-board computer menu
( page 43). If the exact value of the maximum
Y
permissible charge current cannot be set, select
the next lowest value which can be set.
i
If the vehicle requires more time than usual
when charging the high-voltage battery,
page 35).
Y
Charging the high-voltage battery
check the maximum permissible charge cur-
rent settings.
Connecting the charging cable
Shift the transmission to position j.
X
Switch the ignition off.
X
Open vehicle socket (
X
Insert the power supply plug into the electri-
X
cal outlet to the stop.
Insert the charging cable connector into vehi-
X
cle socket : to the stop.
Indicator lamp ; first flashes orange and
then green.
The high-voltage battery is being charged.
If the charging cable is connected to the vehicle,
you cannot start the engine or move the vehicle.
As soon as the charging process begins, you can
display the charging prediction on the
on-board computer menu. The charging predic-
tion is either the anticipated condition of charge
at the programed departure time or the time
when the high-voltage battery will be fully
charged ( page 44).
Y
i
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
Removing the charging cable
The high-voltage battery is fully charged when:
the condition of charge display reaches 100%
R
in the multifunction display (
the indicator lamp on the vehicle socket lights
R
up green after unlocking or locking the vehicle
page 31).
Y
Settings Settings
page 40)
Y
Z
33