Cleaning Modes - Silvercrest SSRA1 Manual

Try to position furniture properly.
Test the product in areas with stairs. This allows
you to verify the product detects the edge of
the drop off.
Do not stand in the way of the robot vacuum
cleaner. Otherwise the robot vacuum cleaner
will be unable to clean these areas.
Find robot vacuum cleaner
A beep will sound after pushing the "Find robot
vacuum cleaner" button
You can then locate your robot vacuum cleaner.
Cleaning
Press the "Start / Pause" button on the robot
vacuum cleaner
12
The "Start / Pause" button on the robot vacuum
cleaner will light up.
12
If the "Start / Pause" button
vacuum cleaner will start in "Classic mode".
Pausing
Press the "Start / Pause" button on the robot
vacuum cleaner
12
during cleaning to pause the cleaning mode.
While the robot vacuum cleaner is paused, you
can push the directional buttons
control to have it move left / right / forward /
backward.
With the robot vacuum cleaner paused you can
press the directional buttons
control to have it move left / right.
Note: if paused more than 10 minutes, the
robot vacuum cleaner will enter Sleep mode
and the "Start / Pause" button
Press the "Start / Pause" button on the robot
vacuum cleaner
12
again to exit Sleep mode. Then push the button
with the desired mode to resume cleaning.
Note: when the product resumes after being paused,
it recalculates the area and may clean areas it has
already cleaned.
Note: if you have two robot vacuum cleaners, you
can control both with one remote.
14 US-EN
309029_1901__silv_Saugroboter SSRA1_content_US.indd 14
on the remote control.
31
or the remote control .
28
flashes, the robot
12
or the remote control
28
on the remote
27
on the remote
27
will go off.
12
or the remote control
28

Cleaning modes

The product has different cleaning modes for better
results. You can select the modes by pressing the
button on the control panel, the remote control or
in the app.
To start the following modes, ensure the product
is "awake". If it has entered Sleep mode, press
the "Start / Pause" button on the robot vacuum
cleaner or on the remote control
12
Sleep mode.
Classic mode
In this mode the product moves in all directions. This
mode is recommended for vacuuming carpets.
Press the "Start / Pause" button on the robot
vacuum cleaner or on the remote control
12
to start "Classic mode".
Auto mode
to exit
28
28
11.09.19 08:26