Silvercrest SSRA1 Manual page 8

should be supervised to ensure
they do not play with the product.
Verify the line voltage matches
that specified on the charging
dock .
2
Never use the charging dock
if damaged.
Handle the power cable
care to avoid damage. Do not
use the power cable
or pull the product or charging
dock . Do not allow the prod-
2
uct to run over the power cable
and keep it away from heat
4
sources.
If the power cable
it must be replaced by a quali-
fied service technician to avoid
dangers.
Do not use the product in rooms
with children.
Do not use the product near
open fire.
Do not allow the product to
vacuum up flammable materials,
for example fuel or printer or
copier toner.
Do not allow the product to vac-
uum up burning items, for exam-
ple cigarettes, matches, ashes and
other objects which could cause
a fire.
8 US-EN
309029_1901__silv_Saugroboter SSRA1_content_US.indd 8
2
with
4
to move
4
is damaged,
4
Check the charging dock, power
cable or power adapter for dam-
age before every use.
To reduce the risk of electric
shock – Do not use outdoors
or on wet surfaces.
Use only manufacturer's recom-
mended attachments.
Do not unplug by pulling on cord.
To unplug, grasp the plug, not the
cord.
Do not handle plug or appliance
with wet hands.
Changes or modifications to this
product not expressly approved
by the party responsible for
compliance could void the user's
authority to operate the product.
Note: This product has been
tested and complies with the lim-
its for a Class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in a
residential installation. This product
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications.
However, there is no guarantee
that interference will not occur
11.09.19 08:26