Silvercrest SSRA1 Manual page 29

Reason
Left wheel malfunction
18
Right wheel malfunction E12
18
Left brush malfunction
20
Right brush malfunction E14
20
Combo floor brush
19
malfunction
The robot vacuum cleaner
is not on the floor.
Cliff sensor malfunction E22
21
Anti-collision sensor
malfunction
Robot vacuum cleaner stuck. E31
Fan malfunction
Battery malfunction
Anti-collision sensor module
malfunction
Gyro navigation module
malfunction
Battery low
HEPA filter
clogged
6
Dust bin full
17
309029_1901__silv_Saugroboter SSRA1_content_US.indd 29
Display
E11
E13
E15
E21
E23
23
E32
E41
E42
E43
Signal tone Solution
Beeps: once
Check left wheel
Beeps: once Check right wheel
Beeps: once
Check left brush
Beeps: once Check right brush
Beeps: once
Check combo floor brush
Beeps: two Move the robot vacuum cleaner
to a clear area and restart.
Beeps: two
Check cliff sensor
Beeps: two
Check anti-collision sensor
Beeps: three Move the robot vacuum cleaner
to a clear area and restart.
Beeps: three Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Beeps: three Replace battery
Beeps: four Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Beeps: five Restart the robot vacuum cleaner.
Please contact customer service
if you are unable to resolve the
problem.
Use the remote control to return
the robot vacuum cleaner to the
charging dock. If the robot vacuum
cleaner is in standby, make sure
it is charged so it will always have
enough power to clean.
Clean HEPA filter
Empty dust bin
18
18
20
20
19
21
23
.
6
.
17
US-EN 29
11.09.19 08:26