Attaching The Side Brushes; Turning The Product On / Off; Use - Silvercrest SSRA1 Manual

You can alternatively plug the power cable
directly into the charging socket
product.
Note: the product sometimes corrects the
position on the charging dock.
"Start / Pause" button
blinking orange: charging
green: fully charged
off: Sleep mode
Note: the area around the charging dock
not have mirrors or other highly reflective objects within
5.9 in (15 cm) of the floor. If necessary, cover these.
CAUTION! Avoid exposing the charging
dock to direct sunlight.
2
CAUTION! Change the position of the charging
dock as little as possible.
2

Use

Due to the complexity of domestic environments,
the product may skip some areas when cleaning.
For better cleaning results we recommend using the
product daily.
309029_1901__silv_Saugroboter SSRA1_content_US.indd 13
4
on the
10
12
must
2

Attaching the side brushes

Install the side brushes
color, pressing the brushes onto the color pins.
Verify the side brushes

Turning the product on / off

Press the power switch
product. "–" means on, "O" means off. If the
„Start / Pause" button
product is on.
Note: do not turn the product off after it has finished
cleaning. Keep the product in the charging dock
so it will be ready for the next vacuuming.
Note: pressing the power switch
date, time and schedule.
Remove obstacles before use, for example
power cables, toys and other objects.
Tuck rug edges under the rug. Keep curtains
and tablecloths off the floor.
according to the slot
20
are secure.
20
on the side of the
9
lights up green, the
12
2
will erase the
9
US-EN 13
11.09.19 08:26