Alarm Store/Forward; Configuring Router Properties Using Bacview - Carrier i-Vu Open Link Installation And Startup Manual

Color/Prime Variable
Caching
Disable Color Cache
Dead Module Timeout

Alarm Store/Forward

On the Alarm Store and Forward page, you can change alarm delivery settings for the i-Vu Open Link used to
store and forward alarms from a remote dial-up site.

Configuring Router Properties using BACview

View or configure i-Vu Open Link properties using the BACview Handheld (part#BV6H), or Virtual BACview
software. Refer to the BACview Installation and User Guide for details.
i-Vu Open Link
Clear (enable) to improve responsiveness in retrieving colors.
Select (disable):
•
To reduce network traffic to third-party (non-color-supporting)
devices
•
If using the i-Vu Open Link on the controller network, but not
as a router
NOTE Selecting this checkbox also disables dead controller
alarms.
After this period (minutes:seconds) of non-response from an Open
controller, the router sends an alarm to the server.
21