Carrier i-Vu Open Link Installation And Startup Manual page 23

NOTE You may need to set up additional Notification Classes if your system will handle Life Safety alarms or if
you need to send certain types of alarms only to an alarm manager other than i-Vu/Field Assistant.
Priorities
Priority of Off-Normal
Priority of Fault
Priority of Normal
Ack Required for Off-Normal,
Fault, and Normal
Recipient List
Recipients
Recipient Description
Recipient Type
Recipient Device Object
Identifier
Process Identifier
Issue Confirmed Notifications Select to have a device continue sending an alarm message until
i-Vu Open Link
NOTE BACnet defines the following Network message priorities
for Alarms and Events.
Priority range Network message priority
00–63 Life Safety
64–127 Critical Equipment
128–191 Urgent
192–255 Normal
BACnet priority for Alarms.
BACnet priority for Fault messages.
BACnet priority for Return-to-normal messages.
Requires a controller acknowledgement for each message type.
Normally not required.
TIP To require operator acknowledgement for an Alarm or
Return-to-normal message (stored in the i-Vu/Field Assistant
database), change the acknowledgement settings on i-Vu/Field
Assistant's Alarm > Enable/Disable tab for an alarm source or an
alarm category.
The first row in this list is i-Vu/Field Assistant. Do not delete this
row. Click Add if you want other BACnet devices to receive
alarms.
Name that appears in the Recipients table.
Use Address (static binding) only for third-party BACnet device
recipients that do not support dynamic binding.
Type the Device Instance from the network administrator for third-
party devices in the field.
#
Change for third-party devices that use a BACnet Process
Identifier other than i-Vu/Field Assistant processes alarms for any
32-bit Process Identifier.
it receives delivery confirmation from the recipient.
19