Table of Contents
Advertisement
PURPOSE
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls, and other utility
and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream
of intake air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with
high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises.
The unit is a component part and is not designed for stand-alone operation.
It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust,
pathogenic germs).
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
DELIVERY SET
Name
Air handling unit
User's manual
Control panel
Installation kit
Packing box
DESIGNATION KEY
VUTR 280 V
4
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT
THE APPROPRIATE TRAINING.
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
ACCESS BY UNATTENDED CHILDREN.
E
EC
Motor type
EC — electronically commutated
Electric heater
_ — without an electric heater
E — with an electric heater
Spigot orientation
V — vertical
Rated air flow [m
3
Series of units
VUTR — heat recovery air handling unit with a rotary heat exchanger
/h]
VUTR 280 V (E) EC
Number
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
www.ventilation-system.com
Advertisement
Table of Contents
