Signage - RAYLASE MINISCAN II-07 Manual

3 PRODUCT DESCRIPTION
3.5

Signage

The signs listed below must be attached to the deflection unit. These signs must not be removed. Any
signs that become illegible must be replaced.
© 2017 RAYLASE GmbH MINISCAN II
The rating plate and the type code printed on it allow key properties of
the product to be determined (see page 15, Product versions). The
rating plate contains at least the following information:
 Company name and address
 Product designation
 Series
 Wavelength for which the product is designed
 Serial number
 Year of production (month)
The series and serial number are also used to identify the product.
The protective seal warns against unauthorised opening of the product.
If the seal is broken, all warranty entitlements against RAYLASE are
rendered void.
Describes the most important safety measures to be followed before
maintenance work is carried out.
A laser warning sign must be attached at the beam output, providing
information about the type of radiation, the specific hazards and the
protection class. The laser warning sign must be attached in line with
DIN EN 60825-1, see page 8, Classification of laser systems, by the
manufacturer of the laser system.
MN102-en / v1.0.3 16