IBM Storwize V5000 Quick Installation Manual page 13

v Do not operate while under the influence of drugs or alcohol.
v Do not support ladder against LIFT TOOL.
v Tipping hazard. Do not push or lean against load with raised platform.
v Do not use as a personnel lifting platform or step. No riders.
v Do not stand on any part of lift. Not a step.
v Do not climb on mast.
v Do not operate a damaged or malfunctioning LIFT TOOL machine.
v Crush and pinch point hazard below platform. Only lower load in areas clear of
personnel and obstructions. Keep hands and feet clear during operation.
v No Forks. Never lift or move bare LIFT TOOL MACHINE with pallet truck, jack or
fork lift.
v Mast extends higher than platform. Be aware of ceiling height, cable trays, sprinklers,
lights, and other overhead objects.
v Do not leave LIFT TOOL machine unattended with an elevated load.
v Watch and keep hands, fingers, and clothing clear when equipment is in motion.
v Turn Winch with hand power only. If winch handle cannot be cranked easily with one
hand, it is probably over-loaded. Do not continue to turn winch past top or bottom of
platform travel. Excessive unwinding will detach handle and damage cable. Always
hold handle when lowering, unwinding. Always assure self that winch is holding
load before releasing winch handle.
v A winch accident could cause serious injury. Not for moving humans. Make certain
clicking sound is heard as the equipment is being raised. Be sure winch is locked in
position before releasing handle. Read instruction page before operating this winch.
Never allow winch to unwind freely. Freewheeling will cause uneven cable wrapping
around winch drum, damage cable, and may cause serious injury. (C048, part 2 of 2)
Safety and environmental notices
xiii