Table of Contents
Advertisement
Solid state drive
Removing the SSD card
1
Follow the procedure in
2
Remove the :
a
base cover
b
battery
3
To remove the Solid State Drive (SSD) card:
a
Peel the adhesive mylar shield that secures the SSD card [1].
NOTE:
Need to be removed carefully in order to be reused on the replacement SSD.
b Remove the M2x3 screw that secures the SSD to the system [2].
c
Slide and lift the SSD from the system [3].
NOTE:
This applies only to the SATA M.2 2280 version of the SSD
Installing the SSD card
1
Insert the SSD card into the connector on the system.
2
Replace the M2x3 screw that secures the SSD card to the system.
16
Disassembly and reassembly
Before working inside your
computer.
Advertisement
Table of Contents
