Installing hard drive
1
Insert the hard drive into the slot on the system.
2
Replace the four M2 x 2.7 screws to secure the hard drive to the system.
3
Connect the hard drive cable to the connector on the system board.
4
Install the :
a
battery
b
base cover
5
Follow the procedures in
Coin cell battery
Removing the coin cell battery
1
Follow the procedure in
2
Remove the :
a
base cover
b
battery
3
To remove the coin cell battery:
a
Disconnect the coin cell battery cable from the connector on the system board [1].
b Lift the coin cell battery to release from the adhesive and lift it away from the system board [2].
After working inside your
Before working inside your
system.
computer.
Disassembly and reassembly
19