Heat sink assembly
Removing the heat sink assembly
NOTE:
This procedure is only for the UMA model. In the discrete model, heat sink is secured to the system board with four
screws.
1
Follow the procedure in
2
Remove the :
a
base cover
b
battery
c
hard drive
d
SSD card
e
SSD frame
f
WLAN card
g
WWAN card (optional)
h
chassis frame
3
To remove the heat sink :
a
Disconnect the system fan cable from the connector on the system board [1].
b Remove the six (M2x3) screws that secure the heat sink assembly on the system board [2].
NOTE:
•
Remove the heat sink assembly screws in sequential order as indicated on the heat-sink assembly.
c
Lift the heat sink assembly from the system .
Before working inside your
computer.
Disassembly and reassembly
31