Installing The Chassis Frame; Fingerprint Reader - Optional - Dell Latitude 5495 Owner's Manual

Installing the chassis frame

1 Place the chassis frame into the slot on the system.
NOTE: Gently pull the keyboard cable and keyboard back light cables through the spacing in the chassis frame before
placing the chassis frame in the slot on the system.
2 Replace the five (M2x3) screws and eight (M2x5) screws to secure the chassis frame to the system.
3 Connect the keyboard cable and the keyboard backlight cable to their connectors on the system.
NOTE: There may be more than one cable to connect based on keyboard types.
4 Route the WLAN and WWAN (optional) cables through the routing channels.
5 Install the:
a WWAN card (optional)
b WLAN card
c SSD frame
d SSD card
e hard drive
f battery
g base cover
6 Follow the procedure in
Fingerprint reader – optional
26 Disassembly and reassembly
After working inside your system.