Supplied Components; Removing The Covers - Nibe F1145 Installer Manual

Supplied components

Outside sensor Particle filter
Level vessel Safety valve
(0.3 MPa) (3 bar)
Aluminium tape Compression ring couplings
Insulation tape
Temperature Tubes for sensors
sensor
Location
The kit of supplied items is placed in packaging on top
of the heat pump.
NIBE F1145
Room sensor
22
O-rings
5-10 kW
2 x (ø28 x G25)
3 x (ø22 x G20)
12 kW
5 x (ø28 x G25)

Removing the covers

Front cover
28
1. Remove the screws from the lower edge of the front
panel.
2. Lift the panel out at the bottom edge and up.
Side covers
The side covers can be removed to facilitate the installa-
tion.
1. Remove the screws from the upper and lower edges.
2. Twist the cover slightly outward.
3. Move the hatch outwards and backwards.
4. Assembly takes place in the reverse order.
2
1
Chapter 2 | Delivery and handling 9