HP 81110A Quick Start Manual page 97

4 Press the
both outputs. Set the period to
Figure 50
5 Go to the
Set high levels of
Figure 51
NOTE:
HP 81110/04A Quick Start
softkey to enter the Timing menu. Switch
|TIMING|
Current TIMING Screen
Menu to set the appropriate clock output voltages.
|LEVELS|
and low levels of
2.50 V
Current LEVELS Screen
The TIMING and LEVELS screens for HP 81110A with
HP 81112A 3.8V/330 MHz Outputs look different to the screens
shown here as this instrument has no channel addition, fixed
source impedance of 50
differential outputs.
Getting Started
.
12.5 ns
0.0 mV
Ω, Ω
assumes 50 load impedance and has
Getting Started
Examples
ON
for both outputs.
99