HP 81110A Quick Start Manual page 90

Getting Started
Examples
2 Press the
Menu. Select
1 and
Figure 42
3 Press the
pattern as follows. Enter 8 for Last.
Move to bit-editing window for CH1 and enter pattern
channel 1. Move down to CH2 and select first address by turning the
know counterclockwise and enter pattern
Figure 43
92
softkey to enter the Operating/Trigger Mode
|MODE/TRG|
CONTINUOUS PATTERN of
at Out 2 using the MODIFY knob.
NRZ-Pulses
Current MODE/TRG Screen
softkey to enter the Pattern menu. Set up the bit
|PATTERN|
Current PATTERN Screen
Getting Started
. Select at Out
NRZ-Pulses
10100010
for channel 2.
00001000
HP 81110/04A Quick Start
for