Setting Limits - HP 81110A Quick Start Manual

Setting Limits

Figure 16
Access the output limitation (LIMITS) menu screen by pressing the
To prevent your device from being damaged by excessive voltages it is
recommended to limit the output of the instrument. You can switch the
limit feature on, or off and set the required limits as either voltages or
currents.
Please select from:
1 Limits Status -
2 High Voltage Limit - High-V
For the 10 V output channels HP 81105A and HP 81111A the range
is:
For the 3.8 V output channels HP 81112A the range is:
+3.80V
HP 81110/04A Quick Start
LIMITS Screen
softkey then pressing the
,
ON OFF
to
-19.8V +20.0V
Introduction
Setting Limits
softkey.
|LIMITS|
-1.90V
Introduction
to
57