S9810 Switching Fabric Module Leds - H3C S9800 Series Installation Manual

Table 35 Management Ethernet port LED description
Status
LINK
Steady on
Steady on
Off

S9810 switching fabric module LEDs

Fan status LED
The fan status LED (FAN) shows the fan tray operating status.
Table 36 Fan status LED description
LED
FAN
Card status LEDs
The switching fabric module provides SLOT LEDs for the LPUs and switching fabric modules. Slots 0
to 9 indicate the operating status of the LPUs. Slots 10 and 11 indicate the operating status of the
switching fabric modules.
Table 37 Card status LED description
LED
Slots 0 to 9
Slot 10 and Slot 11
ACTIVE LED
The ACTIVE LED indicates the active and standby working mode of the switching fabric module.
Description
ACT
A link is present, and the management Ethernet port is receiving or
Flashing
sending data.
Off A link is present.
Off No link is present.
Status
Green
Red
Flashing red and green
Status
Steady green
Flashing green
Flashing red
Off
Steady green
Flashing green
Steady red
Flashing red
Off
Description
The fan tray is operating correctly.
The fan tray is faulty or no fan tray is installed.
The two fan trays are in opposite airflow directions.
Description
The LPU is starting. If the LED remains steady green, the LPU is
faulty.
The LPU is operating correctly.
An over-temperature condition has occurred.
The LPU is powered off.
The switching fabric module is starting. If the LED remains steady
green, the switching fabric module is faulty.
The switching fabric module is operating correctly.
A software failure has occurred.
An over-temperature condition has occurred.
The switching fabric module is powered off.
67