S E C T I O N 3 . 1 - S E T T I N G U P S A B R I N; P R E P A R A T I O; S E C T I O N 3 . 2 - S A B R I N A S P I K E - WILSON AUDIO Sabrina Installation And Care Manual

20
S a b r i n a I n s t a l l a t i o n a n d C a r e
Note: Before setting up the Sabrina, study carefully Sec tion 2 , "In Your
Room." It provides valuable information on determining the ideal room
location for your speakers.
Section 3�1—Setting up Sabrina
Preparation
You will need the following items:
• Supplied hardware kit
• Tape measure
• Known listening position
Your dealer is trained in the ar t and science of the Wilson Audio Setup
Procedure ( WASP) outlined in Section 2. Before the spike assemblies are at-
tached to the bottom of your Sabrinas, the set up and fine tuning of your loud-
speaker should be completed. Before spiking your Sabrinas, use masking tape to
carefully mark their location.
Section 3�2—Sabrina Spikes
The Sabrina comes with a set of heavy duty spikes (see Figure 3). These
spikes also provide a secure mechanical reference point as well as optimal
height placement for the Sabrina. Aluminum disks that fit beneath the spikes
G u i d e
A u t h e n t i c E x c e l l e n c e ™