Advertisement
8
Wi l s o n Au d i o S u b s o n i c I n s t a l l a t i o n G u i d e
Section 1.1—Wilson Audio Subsonic Crate Content
Note: To avoid damaging the Yvette's painted surface. Please remove any jewelry
such as rings, watches, necklaces, and bracelets during this process.
Please take the time before you attempt to setup up your Wilson Audio Subsonic
to review the contents of your Wilson Audio Subsonic tool and spike kit. Set these items
in an accessible area as you will need them during the setup process. See the two graph-
ics below :
Section 1.2—Preparation
You will need the following items:
•
Supplied hardware kit
•
Electric screwdriver or batter y-operated drill
•
Phillips head drive bit
A u t h e n t i c
E x c e l l e n c e
WAMM Master Subsonic Tool Kit
1/2" Nut Driver
Caster Wrench
3/4" Combo
Wrench
Mechanical Diode
QTY: 4
1/4" Allen Elbow
Polishing Cloth
Set Screws
Spike with Nut
QTY: 4
Aluminum Spike Pads
QTY: 4
Advertisement
